How To Install Flex Banner? Learned It!

Hello guys, KunMao today wants to show you how Flex Banner should be installed. Flex Banner has a variety of performance and use is also different below we will understand together, for different construction sites, what are the different Flex Banner installation methods.

Cement nails/glue:

This is the most common installation method for small wall spray painting, directly using cement nails along the four sides of the spray advertising nailed to the wall, or glue paste, simple and convenient. More suitable for cement wall above the installation of Flex Banner.

Flex Banner+ Wooden keel:

Generally used for street wall craft advertising, wall display boards, short-term advertising display wall. The foundation of the wall should be solid wall as far as possible or the foundation that can make the wooden keel firmly fixed on the wall with nails. In the screen design, the screen size needs to be expanded by 3-5 cm, so that the screen part is wrapped in the wooden keel, and the Flex Banner needs to leave a few centimeters of white edge.

nstallation method: First use the air nail gun to fix the wooden keel on the wall as a frame, and then use the code nail gun to fix the spray painting picture on the wooden keel. Because the wind and rain outside the wood is easy to spoil the chaff, generally about half a year is no problem.

Trusses are painted and installed:

Truss inkjet is also more common, usually used for activities, for this kind of inkjet installation first inkjet cloth around the bleeding 5cm~15cm, convenient double-layer superposition button, installation of truss inkjet we can use thin lines or cable ties and other fixed. If it is a small truss, it can be directly fixed by glue paste.

Door front storefront spray painting

The most commonly used installation method for store door heads is: Flex Banner + double-layer Angle iron steel frame, two layers of steel frame welded into a frame, and the inkjet cloth is fixed on the door head with iron wire or nylon rope.

The process requirements for the Flex Banner are: the thickness of the two-layer steel frame must be measured when the screen is designed, the thickness is added to the screen, so that the screen is wrapped in the steel frame, and the Flex Banner needs to leave the edge through the rope to tie the buckle.

Outdoor billboards, advertising tower installation:

The base part of this billboard is a steel frame structure, and the frame of the billboard is welded by the workers on the spot. The front of the frame is a steel frame + galvanized steel plate, and the back is supported by the steel frame, which is viewed as a triangular structure from the side.

It is recommended to use thickened cloth for inkjet printing, and the late process is still to wear rope to hold the edge.

High wall painting installation

Because the spray painting is high from the ground, it needs aerial workers to use cables to fall from the height, or use aerial work vehicles to lift people from the ground to the corresponding height for installation.

Sometimes it is necessary to install a large print advertising cloth on a large wall, but often there is no advertising iron frame on the wall. There are several methods for high-altitude installation:

1, cement nails:

Nail the print print directly to the wall with cement nails, and nail it to the wall along the sides of the print advertisement.

2, advertising on the wall first iron frame:

According to the actual situation of the site on the wall welding, installation of iron frame, this method is suitable for long-term advertising, you can often replace the printing advertising cloth. The cost of investment should be large and small, it can be said that one-time investment can obtain long-term benefits.

3. Nail a wooden frame on the wall:

On the wall, holes are drilled with electric hammers into the wood, and then the wooden strips are nailed. Finally, nail the print advertising cloth to the wood, starting from one of the top edges.

How to determine if the Flex Banner installation is complete

1, after the installation should be smooth without ripples.

2, gently press down with the fingers, if the obvious feeling of pressure, it indicates that the installation is correct.

3. After getting the inkjet, check the text content, picture format, and whether the text is not right or wrong.

4, the picture must not be retouched, the scene is the most real. Also for later acceptance.

Inkjet is closely related to industry activities, and advertisers can not be unclear. KunMao believes that the future printing industry will be more brilliant, and the technology will be more perfect.